Recommended Tool List for Repairing TouchMate Kiosk

Here is a recommended tool list for repairing a TouchMate Kiosk. It is by no means definitive or comprehensive, but it should hopefully provide you a good starting point to have an idea what you might need on hand to get your Kiosk back up and running.

1.  1/4 Swivel head ratchet
2.  medium extension
3.  metric deep well sockets 5.5mm 7mm 8mm 10mm
4.  razor knife
5.  side cutters
6.  needle-nose pliers
7.  4-in-1 screwdriver
8.  T-handle allen wrench 2.5mm 3mm 4mm and a set of Metric short arm hex keys
9. gear wrench or ratcheting-wrenches 8mm 10mm (5.5mm & 7mm are hard to find so get standard wrenches)
10. optional but very handy: swivel handle cordless screwdriver & 1/4 in drive bit 
11. optional: 18v cordless drill with fully charged battery and good set of small bits 1/4 in and smaller
12. moving blanket or pad
13. bag of 8-inch cable ties
14. laptop
15. flashlight
16. Volt Ohm Meter
17. Portable DVD drive
18. flash storage drive
19. small bottle of loc-tite
20. power polarity/ground tester
21. Keyboard and mouse